With a greater diameter, heavier structure and more powerful drive, this type of finisher provides a higher amplitude for faster finishing and/or steel media processes. Its longer cycle is optimal for continuous processes.
Improved upstream part manufacturing has reduced burr size, but edge-break is frequently still required. A long radius finisher is practical for single pass finishing such parts.
| Model | Capacity (c.u. ft.) |
Motor H.P. (A) |
# of drains |
Lubrication System (C) |
Discharge Height (D) |
Channel Width (E) |
Overall Diameter (F) |
Overall Height (G) |
Foot |
|---|---|---|---|---|---|---|---|---|---|
| VTG-5LR | 5 | 5 | 2 | grease | 32" | 9.5" | 55" | 39" | 5'X5' |
| VT-10LR | 10 | 7.5 | 2 | auto oil | 42" | 11" | 68" | 50" | 6'x6' |
| VT-20LR | 20 | 20 | 3 | auto oil | 48" | 13" | 92" | 58" | 8'x8' |
| VT-30LR | 30 | 20 | 3 | auto oil | 50" | 15" | 120" | 60" | 10'x10' |
| VT-40LR | 40 | 30 | 4 | auto oil | 52" | 16.5" | 128" | 62" | 11'x11' |
| VT-50LR | 50 | 30 | 4 | auto oil | 54" | 17.5" | 140" | 64" | 12'x12' |
(Due to on going design improvements, design and specifications are subject to change without notice.)